Portable Higher Capacity scale in “Briefcase” style.

This innovative scale is a portable Scale-In-A-Briefcase. It’s a portable bench scale that runs on batteries or an optional AC Adaptor. It reads in Grams, Ounces, Pounds and Kilograms. TARE/ZERO function and more. This is the BEST IDEA YET for a Weighing Scale! It’s portable and stable.

This Scale is Great for:

SHIPPERS * REFRIGERATION TECHS * GEOLOGISTS * METEOR HOUNDS * ARTIFACT BUFFS * SEISMOLOGISTS * ROCK HUNTERS * ANTHROPOLOGISTS * FACTORY SHIPMENT SPOT CHECKERS * CUSTOMS INSPECTORS * AGRICULTURAL INSPECTORS

This is a handy Bench-Scale-In-A-Briefcase. And at this super-low price, you just won’t be able to resist buying one. Lifetime full warranty. Now with a new Stainless Steel weighing platform!

• 9” x 9” reinforced Stainless-Steel Platform 

• Excellent for geology, shipping/receiving, spot checking, refrigerant and more

• Extra long cord on detachable, mountable display

• Single Point Load Cell System

When to calibrate - Calibration is almost never required

Advanced users only . If the scale is inaccurate, calibration may be desired when the scale is first set up for use, or is the scale is moved to a different altitude or gravitation. the is Necessary because of the weight of a mass in one location is not necessarily the swme in another location. Also, with time and use, mechanical deviations can occur. However in order to calibrate accurate calibrations weights are required. Do not Attempt Calibration if you do not have a 80kg (BCS80) Calibration mass. The scale will not function if incorrect calibration weights are used.

1)Place the scale on a Flat, very stable surface and turn it on.

2)Press and hold the (TARE) key for 3 seconds until the display shows CAL, then release the key.

3) Press the (TARE) key again, the display will flash CAL and then flash the calibration weight needed (80kg)

4)Gently place the calibration weights on the scale and wait 3 seconds

5)Calibration is complete

If calibration is not incorrect then try the following steps:

-Replace the batteries

-Try a more stable surface or vibration and interference free location.

-Be sure there is no static electricity on the scale (use and anti-static spray to remove static electricity)